support.sas.com
 
 
support.sas.com


Base SAS 9.4_M6

Hot Fix Downloads for 64-bit Enabled Solaris

* Important changes to Hot Fixes!

D9T001 was replaced by D9T085

D9T003 was replaced by F1E009

D9T004 was replaced by D9T073

D9T005 was replaced by F1E009

D9T007 was replaced by D9T120

D9T008 was replaced by D9T123

D9T013 was replaced by D9T130

D9T014 was replaced by D9T104

D9T015 was replaced by D9T131

D9T016 was replaced by F1E009

D9T017 was replaced by D9T128

D9T019 was replaced by F1E009

D9T020 was replaced by D9T128

D9T024 for 64-bit Enabled Solaris
Base SAS 9.4_M6
Issue(s) Addressed:Introduced:
64117 You encounter error messages when you try to use the IMPORT procedure D9T024
Released: May 20, 2019     Documentation: D9T024s6.html       Download: D9T024s6.zip  
Top ^

D9T025 was replaced by D9T128

D9T026 was replaced by F1E009

D9T027 was replaced by D9T128

D9T028 was replaced by F1E009

D9T029 was replaced by D9T120

D9T031 for 64-bit Enabled Solaris
Base SAS 9.4_M6
Issue(s) Addressed:Introduced:
64316 The FILENAME URL statement stops responding and generates a segmentation violation when you use a URL that redirects D9T031
Released: June 17, 2019     Documentation: D9T031s6.html       Download: D9T031s6.zip  
Top ^

D9T033 was replaced by F1E009

D9T034 was replaced by G2L008

D9T035 was replaced by D9T123

D9T036 was replaced by D9T062

D9T037 was replaced by D9T128

D9T038 for 64-bit Enabled Solaris
Base SAS 9.4_M6
Issue(s) Addressed:Introduced:
64428 The KCVT() function performs poorly in SAS® 9.4M4 (TS1M4) and later releases D9T038
Released: July 05, 2019     Documentation: D9T038s6.html       Download: D9T038s6.zip  
Top ^

D9T039 for 64-bit Enabled Solaris
Base SAS 9.4_M6
Issue(s) Addressed:Introduced:
64155 The sasep-admin script fails with an error on Amazon EMR clusters D9T039
NOTE: If you install this hot fix and have SAS Threaded Kernel 9.4_M6 installed, you must also install hot fix F8C004.
If you install this hot fix and have SAS/ACCESS Interface to Hadoop 9.46 installed, you must also install hot fix E4Y009.
If you install this hot fix and have SAS Interface to Viya Model Publishing and Scoring 8.3 installed, you must also install hot fix F6M001.
If you install this hot fix and have SAS Data Loader Mid-Tier 3.1 installed, you must also install hot fix B3I005.
Released: October 22, 2019     Documentation: D9T039s6.html       Download: D9T039s6.zip  
Top ^

D9T040 was replaced by D9T128

D9T041 was replaced by D9T123

D9T042 was replaced by D9T130

D9T043 was replaced by D9T128

D9T044 was replaced by D9T071

D9T046 was replaced by F1E009

D9T051 was replaced by D9T128

D9T052 for 64-bit Enabled Solaris
Base SAS 9.4_M6
Issue(s) Addressed:Introduced:
64914 The message "ERROR: SYSTEM ABEND 0C4..." might occur when you run PROC SGPANEL in SAS® 9.4 D9T052
Released: October 11, 2019     Documentation: D9T052s6.html       Download: D9T052s6.zip  
Top ^

D9T054 was replaced by D9T120

D9T055 was replaced by G2L008

D9T056 was replaced by F1E009

D9T057 was replaced by D9T085

D9T058 for 64-bit Enabled Solaris
Base SAS 9.4_M6
Issue(s) Addressed:Introduced:
65245 Read Access Violation errors or a warning occur when you route output to ODS destinations in a DBCS environment and a custom translation table is used D9T058
Released: December 20, 2019     Documentation: D9T058s6.html       Download: D9T058s6.zip  
Top ^

D9T059 was replaced by D9T123

D9T062 for 64-bit Enabled Solaris
Base SAS 9.4_M6
Issue(s) Addressed:Introduced:
64417 In-database procedures require engine-specific definitions for SQL syntax requirements D9T036
65340 You receive "Syntax error, statement will be ignored..." when you run a procedure that supports in-database processing D9T062
NOTE: If you install this hot fix, you must also install hot fixes D9T120, D9T123, and D9T128 for Base SAS 9.4_M6.
If you install this hot fix and have SAS Threaded Kernel Extensions for FedSQL and DS2 Standalone 9.4_M6 installed, you must also install hot fix E5Q002.
If you install this hot fix and have SAS Threaded Kernel DS2 and FedSQL Language Processors 9.41_M4 installed, you must also install hot fix E9Y008.
If you install this hot fix and have SAS Threaded Kernel 9.4_M6 installed, you must also install hot fix F8C004.
Released: January 20, 2020     Documentation: D9T062s6.html       Download: D9T062s6.zip  
Top ^

D9T064 was replaced by F1E009

D9T066 was replaced by D9T131

D9T067 was replaced by D9T128

D9T069 was replaced by D9T120

D9T071 for 64-bit Enabled Solaris
Base SAS 9.4_M6
Issue(s) Addressed:Introduced:
64130 The error "Internal error. Failed to get disked NAMESTR from hptgetdiskvarno" occurs when you access an SPD Engine data set D9T044
65596 The error message "The PARALLELREAD option can only be used with an HDFS library" occurs when you access SPD Engine data D9T071
NOTE: If you install this hot fix and have Base SAS 9.4_M6 installed, you must also install hot fix D9T128.
If you install this hot fix and have SAS Threaded Kernel Components for Scalable Performance Data 9.41_M6 installed, you must also install hot fix F8U001.
If you install this hot fix and have SAS Threaded Kernel Drivers for Scalable Performance Data 5.3_M3 installed, you must also install hot fix F8T001.
Released: March 06, 2020     Documentation: D9T071s6.html       Download: D9T071s6.zip  
Top ^

D9T073 for 64-bit Enabled Solaris
Base SAS 9.4_M6
Issue(s) Addressed:Introduced:
59920 Remote Library Services to a SAS/SHARE® or SAS/CONNECT® server fail with the “OPEN DATA SET…” message D9T004
62109 Expanding the contents of a SAS/SHARE® library might take longer than two minutes D9T073
Released: March 09, 2020     Documentation: D9T073s6.html       Download: D9T073s6.zip  
Top ^

D9T075 for 64-bit Enabled Solaris
Base SAS 9.4_M6
Issue(s) Addressed:Introduced:
65724 A REST transformation in SAS® Data Integration Studio causes issues for a RESTful service that uses the Content-Type header attribute D9T075
NOTE: This hotfix is a pre-requisite to D8Y005. If you install this hot fix , you must also install
D8Y005 for Data Integration Studio 4.904 to fully implement updates documented in SAS Note 65724, .
Released: March 30, 2020     Documentation: D9T075s6.html D       Download: D9T075s6.zip  
D indicates that the Documentation has special pre-installation, post-installation or other unique instructions not commonly used for hot fix deployment.
Top ^

D9T077 was replaced by D9T120

D9T078 was replaced by D9T131

D9T079 for 64-bit Enabled Solaris
Base SAS 9.4_M6
Issue(s) Addressed:Introduced:
65834 PROC METADATA returns various errors when the input contains certain multi-byte characters D9T079
Released: May 07, 2020     Documentation: D9T079s6.html       Download: D9T079s6.zip  
Top ^

D9T080 was replaced by D9T120

D9T082 was replaced by D9T128

D9T083 was replaced by D9T130

D9T084 was replaced by D9T123

D9T085 for 64-bit Enabled Solaris
Base SAS 9.4_M6
Issue(s) Addressed:Introduced:
62319 Connections might become disconnected and return "ERROR: Conversations terminated..." when you use SAS/CONNECT® software D9T001
63215 A segmentation violation occurs in a SAS/CONNECT® client session when you use the CONNECTKEEPALIVE environment variable D9T001
65079 The SAS/SHARE® server stops responding and writes VQTCP messages to the server.log file D9T057
65929 A grid-enabled sign-on to SAS® 9.4M6 (TS1M6) fails with errors, including "Remote signon … canceled" D9T085
Released: June 03, 2020     Documentation: D9T085s6.html D       Download: D9T085s6.zip  
D indicates that the Documentation has special pre-installation, post-installation or other unique instructions not commonly used for hot fix deployment.
Top ^

D9T088 was replaced by D9T130

D9T090 for 64-bit Enabled Solaris
Base SAS 9.4_M6
Issue(s) Addressed:Introduced:
64589 The EXPORT procedure does not write out all the variables listed for the KEEP= data set option when the RENAME= data set option is also included D9T090
Released: June 05, 2020     Documentation: D9T090s6.html       Download: D9T090s6.zip  
Top ^

D9T093 for 64-bit Enabled Solaris
Base SAS 9.4_M6
Issue(s) Addressed:Introduced:
65999 The FORMAT procedure fails with a U1335 abend when you input the CNTLIN= data set D9T093
Released: July 02, 2020     Documentation: D9T093s6.html       Download: D9T093s6.zip  
Top ^

D9T094 was replaced by D9T120

D9T095 for 64-bit Enabled Solaris
Base SAS 9.4_M6
Issue(s) Addressed:Introduced:
66227 The SAS® 9.4M6 (TS1M6) EMAIL access method removes trailing blanks from attachments D9T095
66233 The SAS® session fails with a segmentation violation when you use a long value in the FROM= option in a FILENAME EMAIL statement D9T095
Released: July 12, 2020     Documentation: D9T095s6.html       Download: D9T095s6.zip  
Top ^

D9T097 was replaced by D9T131

D9T098 was replaced by D9T129

D9T100 for 64-bit Enabled Solaris
Base SAS 9.4_M6
Issue(s) Addressed:Introduced:
66379 The CALL IS8601_CONVERT routine can produce incorrect results when the interval value is listed in weeks D9T100
Released: July 29, 2020     Documentation: D9T100s6.html       Download: D9T100s6.zip  
Top ^

D9T103 was replaced by D9T128

D9T104 for 64-bit Enabled Solaris
Base SAS 9.4_M6
Issue(s) Addressed:Introduced:
63839 FILENAME FTP using TLS fails with an SSL/TLS error on the FTP data connection D9T014
65525 Issues regarding ports occur when you try to use the SAS® FTP access method to communicate with applications like Box, Medidata, and Veeva D9T104
NOTE: If you install this hot fix, you must also install hot fix D9T128 for Base SAS 9.4_M6.
Released: September 25, 2020     Documentation: D9T104s6.html       Download: D9T104s6.zip  
Top ^

D9T105 was replaced by D9T123

D9T107 was replaced by D9T128

D9T113 was replaced by D9T120

D9T115 was replaced by D9T128

D9T116 was replaced by D9T120

D9T117 for 64-bit Enabled Solaris
Base SAS 9.4_M6
Issue(s) Addressed:Introduced:
67201 SAS® Studio 3.8 does not show the history of the main branch of a cloned repository D9T117
Released: January 27, 2021     Documentation: D9T117s6.html       Download: D9T117s6.zip  
Top ^

D9T120 for 64-bit Enabled Solaris
Base SAS 9.4_M6
Issue(s) Addressed:Introduced:
63923 An enhancement to the SAS® system option SQLIPONEATTEMPT prevents further attempts to run a query if an error occurs while the query is running D9T007
63940 Subsetting a view in SAS® 9.4M5 (TS1M5) with a comparison operator that contains an equal sign and colon (=:) returns different results than expected D9T007
64015 A memory leak occurs after multiple CONNECT and DISCONNECT statements when you use the SQL procedure with explicit pass-through D9T007
64342 Performance degradation might occur when you use a PROC SQL query to access SAS® Scalable Performance Data Server 5.4 D9T029
64343 A PROC SQL query that joins multiple Hive tables results in "Execute error: Error while compiling statement: FAILED: SemanticException[Error 10017]" D9T029
64344 A new SAS/ACCESS® Interface to Snowflake product is available as an add-on to SAS® 9.4M6 (TS1M6) in Rev. 940_19w34 or to SAS® Viya® 3.4 (19w34) D9T029
64345 A new SAS/ACCESS® Interface to Google BigQuery product is available as an add-on to SAS® 9.4TS1M6 in Rev. 940_19w34 or to SAS® Viya® 3.4 (19w34) D9T029
64422 A new environment variable, SAS_PRESERVE_EMPTY_STRING, provides options for the behavior when a blank or empty string is encountered D9T029
64528 Aggregate functions are not passed down through an implicit pass-through query to Apache Hive D9T045
64592 "ERROR: The SQL statement contains a UDF that is not being passed to the database" occurs with Hadoop queries that contain user-defined functions D9T045
65036 SAS® Customer Intelligence queries to five or more joined DBMS tables take a long time to execute D9T045
64819 A DATA step that executes a PROC SQL view with a WHERE clause does not select the index D9T054
64931 An incorrect index is selected by the SQL procedure when the number of distinct values exceed 2147483647 (2 GiB - 1) D9T054
65138 The message "ERROR: Provided buffer is not large enough" occurs when you use the CONNECT TO statement with the SQL procedure D9T054
65537 An SQL procedure might generate incorrect results when a variable is renamed in a query D9T069
65539 A query might return incorrect results if it contains an SQL JOIN to a variable that was created in an SQL view D9T069
66193 Joining multiple DBMS tables might result in performance issues because some of the processing is done in SAS® rather than in the database D9T069
65553 A query passed to a database might not include the ORDER BY clause when a variable is renamed D9T074
65581 An SQL procedure query that creates a SAS® table returns a "Write Access Violation" error D9T074
65563 You encounter performance problems when a query passed to a database does not include a WHERE clause D9T077
65766 Ambiguous column or duplicate column errors might occur when running a query against a database D9T077
65597 An SQL procedure query with a WHERE clause that contains multiple subselects might return incorrect results D9T080
65835 A series of PROC SQL queries might not generate a distinct set of rows D9T080
66214 PROC SQL queries might generate exceptions if you use the CORRESPONDING (CORR) keyword with the EXCEPT set operator to combine tables D9T094
66707 An incorrect query might be sent to a database when two like-named variables are being selected and grouped on, resulting in slow performance D9T094
67011 A query that is passed to the database might include an incorrect variable name in the GROUP BY clause D9T113
67022 Running an SQL procedure query to a DBMS library returns the message "ERROR: sqlplan internal error..." D9T113
67148 The message "ERROR: CLI prepare error...ERROR: unterminated quoted string at or near "'\\'" occurs when you use an escape character D9T116
67406 A segmentation violation might occur when you query a SAS® view with a SELECT COUNT(*) clause D9T120
NOTE: If you install this hot fix, you must also install hot fixes D9T062, D9T128 and D9T123 for Base SAS 9.4_M6.
If you install this hot fix and have SAS Threaded Kernel Extensions for FedSQL and DS2 Standalone 9.4_M6 installed, you must also install hot fix E5Q002.
If you install this hot fix and have SAS Threaded Kernel DS2 and FedSQL Language Processors 9.41_M4 installed, you must also install hot fix E9Y008.
If you install this hot fix and have SAS Threaded Kernel 9.4_M6 installed, you must also install hot fix F8C004.
If you install this hot fix and have SAS/ACCESS Interface to Teradata 9.46 installed, you must also install hot fix F1K004.
If you install this hot fix and have SAS/ACCESS Interface to Amazon Redshift 9.43 installed, you must also install hot fix J6I001.
Released: February 23, 2021     Documentation: D9T120s6.html       Download: D9T120s6.zip  
Top ^

D9T121 was replaced by D9T131

D9T122 was replaced by D9T128

D9T123 for 64-bit Enabled Solaris
Base SAS 9.4_M6
Issue(s) Addressed:Introduced:
63630 Performance issues or an ORA-01841 error might occur when you query a database management system (DBMS) table D9T008
64417 In-database procedures require engine-specific definitions for SQL syntax requirements D9T035
64422 A new environment variable, SAS_PRESERVE_EMPTY_STRING, provides options for the behavior when a blank or empty string is encountered D9T035
63320 SAS® Federation Server does not translate the DATE format as documented for a view (DSN=BASE) created from database tables D9T041
65789 The "Create Date" attribute for tables in Hadoop shows as missing in SAS® Studio and in output from the CONTENTS procedure D9T059
65938 Incorrect values might be written to Hadoop for columns defined with the BIGINT data type D9T084
66251 A segmentation violation might occur when you join two Teradata tables on BIGINT data type columns D9T096
67588 A segmentation violation occurs in SAS/ACCESS® Interface to Oracle when you use PROC SQL with the PRESERVE_COMMENTS option D9T123
NOTE: If you install this hot fix, you must also install hot fixes D9T062, D9T128, D9T130, and D9T120 for Base SAS 9.4_M6.
If you install this hot fix and have SAS Threaded Kernel Extensions for FedSQL and DS2 Standalone 9.4_M6 installed, you must also install hot fix E5Q002.
If you install this hot fix and have SAS Threaded Kernel DS2 and FedSQL Language Processors 9.41_M4 installed, you must also install hot fix E9Y008.
If you install this hot fix and have SAS Threaded Kernel 9.4_M6 installed, you must also install hot fix F8C004.
If you install this hot fix and have SAS/ACCESS Interface to Hadoop 9.46 installed, you must also install hot fix E4Y009.
If you install this hot fix and have SAS/ACCESS Interface to Teradata 9.46 installed, you must also install hot fix F1K004.
Released: March 19, 2021     Documentation: D9T123s6.html       Download: D9T123s6.zip  
Top ^

D9T124 was replaced by D9T128

D9T126 was replaced by D9T128

D9T127 for 64-bit Enabled Solaris
Base SAS 9.4_M6
Issue(s) Addressed:Introduced:
67414 The KPROPCASE function does not convert Half-Katakana characters to Full-Katakana characters D9T127
Released: April 13, 2021     Documentation: D9T127s6.html       Download: D9T127s6.zip  
Top ^

D9T128 for 64-bit Enabled Solaris
Base SAS 9.4_M6
Issue(s) Addressed:Introduced:
63688 Using the ODS EXCEL and ODS POWERPOINT destinations with SAS/IntrNet® software in SAS® 9.4M6 (TS1M6) generates errors D9T017
64028 GRIDINSTALLLOC and GRIDRSHCOMMAND are now available as SAS® system options D9T020
63295 A SAS® session can stop working in a Microsoft Windows operating environment due to incorrect syntax for an %IF macro statement in open code D9T025
63508 An application that is executed multiple times ends with an exception D9T025
64160 Access methods that govern when Python can be executed from SAS® code D9T027
64417 In-database procedures require engine-specific definitions for SQL syntax requirements D9T037
64422 A new environment variable, SAS_PRESERVE_EMPTY_STRING, provides options for the behavior when a blank or empty string is encountered D9T037
64430 The IMPORT procedure fails in SAS when you use the GUESSINGROWS=MAX option or a high value for the argument in the GUESSINGROWS= statement D9T040
64130 The error "Internal error. Failed to get disked NAMESTR from hptgetdiskvarno" occurs when you access an SPD Engine data set D9T043
63624 An unpaired quotation mark in a LIBNAME statement generates the message "Error: Buffer overrun occurred" D9T051
64651 The error "The text expression length . . . exceeds maximum length" appears after using a %SUPERQ function and a text-string value greater than 32K D9T051
65288 The metadata_setassn function does not successfully remove a user from a group even though the return code is 0 when you use the Chinese locale D9T060
65379 Attempting to use a template generated by the Output Delivery System (ODS) might cause SAS® to crash D9T067
64543 The message "ERROR: Recursive Segmentation Violations" appears in the SAS® log after you run code with incorrect syntax D9T082
65606 Using a forward slash with the %SYSLPUT or %SYSRPUT statement in SAS® 9.4M5 causes existing code to fail with "Unrecognized option..." D9T082
65808 The ODS HTML destination uses excessive memory when it is used with the TABULATE procedure D9T082
65983 The LUA procedure contains an authorization-bypass vulnerability D9T082
65525 Issues regarding ports occur when you try to use the SAS® FTP access method to communicate with applications like Box, Medidata, and Veeva D9T107
67060 A SAS/SHARE® server unexpectedly terminates while accessing a metadata-bound library D9T115
67429 Reading data input using the SYSIN card might cause a job to loop D9T122
67614 Attempting to use an invalid user-defined format definition causes a SAS® program to error and close D9T124
67615 A TEMPLATE procedure style template with long style names might generate a segmentation violation D9T124
67647 Using PROC FORMAT with a large data set in a Linux operating environment causes an exception and a segmentation violation D9T126
NOTE: If you install this hot fix and have Base SAS 9.4_M6 installed, for UNIX you must also install hot fix F1E009 and
for MVS you must also install hot fix D9T125.

You have Base SAS 9.4_M6 installed, you must also install hot fix
D9T104
D9T129
D9T123
D9T120
D9T062
D9T071
G2L008.

If you install this hot fix and have
SAS Threaded Kernel 9.4_M6 installed, you must also install hot fix E2G005.

SAS Threaded Kernel 9.4_M6 installed, you must also install hot fix F8C004.

SAS Threaded Kernel Message Passing Interface 2.82 installed, you must also install hot fix E8Y002.

SAS Threaded Kernel Extensions for FedSQL and DS2 Standalone 9.4_M6 installed, you must also install hot fix E5Q002.

SAS Threaded Kernel DS2 and FedSQL Language Processors 9.41_M4 installed, you must also install hot fix E9Y008.

SAS Threaded Kernel Components for Scalable Performance Data 9.41_M6 installed, you must also install hot fix F8U001.

SAS Threaded Kernel Drivers for Scalable Performance Data 5.3_M3 installed, you must also install hot fix F8T001.

SAS Threaded Kernel Core Routines 9.4_M6 installed, you must also install hot fix E3Q024.
Released: April 15, 2021     Documentation: D9T128s6.html       Download: D9T128s6.zip  
Top ^

D9T129 for 64-bit Enabled Solaris
Base SAS 9.4_M6
Issue(s) Addressed:Introduced:
65983 The LUA procedure contains an authorization-bypass vulnerability D9T098
NOTE: If you install this hot fix, you must also install hot fix D9T128 for Base SAS 9.4_M6.
Released: April 15, 2021     Documentation: D9T129s6.html       Download: D9T129s6.zip  
Top ^

D9T130 for 64-bit Enabled Solaris
Base SAS 9.4_M6
Issue(s) Addressed:Introduced:
63831 Transcoded Oracle data is truncated incorrectly by the SAS® Federation Server LIBNAME (FEDSRV) engine D9T013
63320 SAS® Federation Server does not translate the DATE format as documented for a view (DSN=BASE) created from database tables D9T042
64387 The APPEND procedure generates the error "Cannot insert into readonly column column-ID" when you access data through SAS® Federation Server D9T042
65920 The PRINT procedure fails to work, and you see an error regarding the sorted data set from the SAS® Federation Server (FEDSVR) engine D9T083
65954 You see a "String data, right-truncated LOCALE…" error when trying to copy or create a table via the SAS® Federation Server (FEDSVR) engine D9T083
65995 "ERROR: CLI prepare...Invalid descriptor" occurs when you insert data into SAS® Scalable Performance Data Server with PROC SQL and the FEDSVR engine D9T088
67561 A SAS® program takes longer than expected to complete when you use the FEDSRV engine to connect to SAS® Scalable Performance Data Server D9T130
NOTE: If you install this hot fix, you must also install hot fix D9T123 for Base SAS 9.4_M6.
Released: April 16, 2021     Documentation: D9T130s6.html       Download: D9T130s6.zip  
Top ^

D9T131 for 64-bit Enabled Solaris
Base SAS 9.4_M6
Issue(s) Addressed:Introduced:
63449 The METALIB procedure contains a security vulnerability D9T015
63593 The METALIB procedure might fail with a segmentation violation or an error when you update tables that contain multiple foreign keys D9T015
63869 A segmentation violation might occur when you expand a metadata library from SAS® Enterprise Guide® or SAS® Studio or execute the DATASETS procedure D9T015
65449 The METALIB procedure returns a syntax error for Google BigQuery, MongoDB, Salesforce, and Snowflake databases D9T066
65821 The message "ERROR: Invalid physical name" occurs when you use a JSON Engine library and METALIB or META LIBNAME Engine D9T078
65900 Registering an Oracle table to the metadata might fail and generate an error D9T078
66025 ALERT - Registration of an Oracle, PostgrSQL or Amazon Redshift table to metadata might fail and could impact SAS® Customer Intelligence 6.6 solutions D9T078
66031 PROC METALIB fails with "ERROR: Repository repository-ID is not registered" when table metadata is updated D9T091
67427 The METALIB procedure returns the error "Invalid connection string attribute : SCHEMA is required for this datasource" D9T121
66894 PROC METALIB fails with "ERROR: Expected "'" or '"'" when table metadata is updated for DB2 D9T131
Released: April 29, 2021     Documentation: D9T131s6.html       Download: D9T131s6.zip  
Top ^

E3R001 was replaced by E3R004

E3R002 was replaced by E3R004

E3R003 was replaced by E3R004

E3R004 for 64-bit Enabled Solaris
Base SAS 9.4_M6
Issue(s) Addressed:Introduced:
63524 The PROC S3 PUT statement fails with a segmentation violation or write thread errors E3R001
64079 The message "HTTP/1.1 400 Bad Request" occurs when you run PROC S3 on Amazon Elastic Compute Cloud (Amazon EC2) E3R002
64158 PROC S3 PUT fails with the message "ERROR: tks3ConnectionUploadPart..." E3R002
64690 The message "The SAS System stopped processing this step because of errors" occurs when you use IAM role security credentials with PROC S3 E3R003
65195 A segmentation violation exception occurs when you use a PUT statement with the S3 procedure E3R004
Released: January 28, 2020     Documentation: E3R004s6.html       Download: E3R004s6.zip  
Top ^

E9V001 for 64-bit Enabled Solaris
Base SAS 9.4_M6
Issue(s) Addressed:Introduced:
63973 An update provides support for the Reiwa era in NENGO and JNENGO formats and informats E9V001
Released: April 24, 2019     Documentation: E9V001s6.html       Download: E9V001s6.zip  
Top ^

F1E001 was replaced by F1E009

F1E002 was replaced by F1E009

F1E003 was replaced by F1E009

F1E004 was replaced by F1E009

F1E005 was replaced by F1E009

F1E006 was replaced by F1E009

F1E007 was replaced by F1E009

F1E008 was replaced by F1E009

F1E009 for 64-bit Enabled Solaris
Base SAS 9.4_M6
Issue(s) Addressed:Introduced:
63389 Code that sets consecutive SYSTASK commands stops executing after about 6,481 consecutive attempts F1E001
63200 Importing a CSV file with UTF-16LE encoding and TERMSTR=CRLF can result in data loss F1E001
63941 The NOHPRUSERFILES option is available as a restricted option in SAS® High-Performance Risk 4.2 F1E001
63846 CALL MODULE routines fail with the message "ERROR: Module module-name is not in whitelist..." when you use Kerberos Constrained Delegation F1E001
64028 GRIDINSTALLLOC and GRIDRSHCOMMAND are now available as SAS® system options F1E001
64207 A segmentation violation occurs after you submit SYSTASK and WAITFOR statements repeatedly within a macro loop F1E002
63143 Windows Defender Credential Guard and SAS® Software F1E003
64580 The SAS/SHARE® server might improperly validate user access to SAS® data sets F1E004
64979 ALERT - An uninstallation of SAS® 9.4 using SAS® Deployment Manager fails with the error "A problem was encountered while uninstalling..." F1E005
65512 Running a SYSTASK command results in an "Access is denied" message in the SAS® log F1E007
65680 SAS/ACCESS® Interface to Oracle contains a remote code execution vulnerability F1E008
65825 The error message "Connection to the server is lost" can appear in SAS® Enterprise Guide® when you are also using the ACTIVEX device driver F1E008
66101 A warning might be issued for the ODS Measured RTF destination F1E009
66750 The LINES or LINESTABLE option in the LSMEANS or SLICE statement might generate an error or reuse letters F1E009
NOTE: If you install this hot fix, you must also install hot fix D9T128 and hot fix G2L008 for Base SAS 9.4_M6.
If you install this hot fix, you must also install hot fix E8Y002 for SAS Threaded Kernel Message Passing Interface 2.82.
If you install this hot fix, you must also install hot fix I4X002 for SAS/STAT 15.1.
Released: November 04, 2020     Documentation: F1E009s6.html D       Download: F1E009s6.zip  
D indicates that the Documentation has special pre-installation, post-installation or other unique instructions not commonly used for hot fix deployment.
Top ^

F4P001 was replaced by F4P005

F4P002 was replaced by F4P005

F4P003 was replaced by F4P005

F4P004 was replaced by F4P005

F4P005 for 64-bit Enabled Solaris
Base SAS 9.4_M6
Issue(s) Addressed:Introduced:
63143 Windows Defender Credential Guard and SAS® Software F4P001
65051 The error message ". . . Could not authenticate to the cluster" appears in the SAS® log when you use the GRDSVC_ENABLE function F4P002
66395 Long user passwords that contain Unicode characters might fail to authenticate with PAM authentication F4P003
66696 SAS® Workload Orchestrator crashes with a "double free or corruption (fasttop)" error message F4P004
67441 The PWENCODE procedure does not consider a blank space at the end of a password F4P005
Released: February 17, 2021     Documentation: F4P005s6.html D       Download: F4P005pt.zip  
D indicates that the Documentation has special pre-installation, post-installation or other unique instructions not commonly used for hot fix deployment.
Top ^

G1J001 for 64-bit Enabled Solaris
Base SAS 9.4_M6
Issue(s) Addressed:Introduced:
64671 The FCMP procedure in a DBCS-encoded session for SAS® 9.4M6 (TS1M6) truncates the return length value to 8 bytes G1J001
NOTE: This hot fix applies to SAS components SAS Compiler and Symbolic Differentiator 9.46 (cmp) and SAS Thread-safe Compiler and Symbolic Differentiator 9.47 (tkcmp). For instructions for how to determine the release of these components you have installed see SAS Note 35968.
Released: September 03, 2019     Documentation: G1J001s6.html D       Download: G1J001s6.zip  
D indicates that the Documentation has special pre-installation, post-installation or other unique instructions not commonly used for hot fix deployment.
Top ^

G2L001 was replaced by G2L008

G2L002 was replaced by G2L008

G2L003 was replaced by G2L008

G2L004 was replaced by G2L008

G2L005 was replaced by G2L008

G2L006 was replaced by G2L008

G2L007 was replaced by G2L008

G2L008 for 64-bit Enabled Solaris
Base SAS 9.4_M6
Issue(s) Addressed:Introduced:
64363 You modify the COLUMNS= option value to change from a multi-column format to a single-column format, but the column width is not correct in the output G2L001
64824 The image that is specified with the PREIMAGE or POSTIMAGE style attribute appears in the wrong place in a PDF file G2L001
64847 An ODS PDF statement with the CONTENTS=YES option creates graphs that overlap or are partially displayed G2L001
65214 The error "The font 'font-name' contains a bad /BBox" appears in Adobe Acrobat Reader while opening a secured PDF created with the ODS PDF statement G2L001
56784 Inline style overrides might affect spacing in the ODS PDF destination G2L001
64667 You cannot click a URL link that is used with the LINK= option in TITLE and FOOTNOTE statements when it is included in PDF output from SAS/GRAPH® G2L001
64669 PDF output that is created by SAS® might not print on certain printers G2L001
64453 The ODS PDF destination with the REPORT procedure generates a premature page break when page orientation and page size toggle within the PDF G2L002
64809 URL links that are created in a PostScript file generated by the ODS PRINTER destination are missing when the file is distilled to PDF G2L002
65403 A "List items—Failed" error occurs in the accessibility checker in Adobe Acrobat regarding a tagged file that is created by the ODS PDF destination G2L002
65695 You cannot print a PDF file in Adobe Acrobat Reader, and you see the message "An error occurred while printing the document" G2L003
65808 The ODS HTML destination uses excessive memory when it is used with the TABULATE procedure G2L004
65961 A screen reader does not read content correctly from a tagged PDF file that contains text that wraps in a table cell G2L005
66210 A PROC FREQ table that exceeds one page in a tagged PDF file generates a segmentation violation G2L005
66425 Links in tagged PDF files that are created by ODS PDF are not read correctly by screen readers or displayed correctly for visual consumers G2L005
66428 A PDF file that is created by the SAS® Output Delivery System (ODS) on z/OS does not have a table of contents G2L005
66101 A warning might be issued for the ODS Measured RTF destination G2L006
66496 Titles and footnotes do not span the full width of a page when you use the COLUMNS= option with the TAGSETS.RTF_SAMPLE tagset G2L006
66926 You see a segmentation violation in the SAS® log after you use the Tagsets.RTF ODS destination G2L007
67003 ODS PDF creation with the BOOKMARKGEN and COMPRESS arguments seems to stop responding and uses high CPU resources G2L008
NOTE: If you install this hot fix, you must also install hot fix F1E009 for Base SAS 9.4_M6.
z/OS and z/OS 64-bit customers must install hot fix D9T125 instead of F1E009.
Released: December 03, 2020     Documentation: G2L008s6.html       Download: G2L008s6.zip  
Top ^

G7U001 for 64-bit Enabled Solaris
Base SAS 9.4_M6
Issue(s) Addressed:Introduced:
65335 Tabs in code data lines cause a buffer overflow in the nlmnyloc routine G7U001
Released: January 15, 2020     Documentation: G7U001s6.html       Download: G7U001s6.zip  
Top ^

H7X001 for 64-bit Enabled Solaris
Base SAS 9.4_M6
Issue(s) Addressed:Introduced:
65891 The XSL procedure contains an authorization-bypass vulnerability H7X001
NOTE: If you install this hot fix and need the fix documented in SAS Note 65891, you must also install hot fix E1Y011 for Base SAS JAR Files 9.4_M6.
Released: May 28, 2020     Documentation: H7X001s6.html       Download: H7X001pt.zip  
Top ^

I2B001 for 64-bit Enabled Solaris
Base SAS 9.4_M6
Issue(s) Addressed:Introduced:
66317 Various CAS functions can create a stack-corruption vulnerability I2B001
Released: July 29, 2020     Documentation: I2B001s6.html       Download: I2B001s6.zip  
Top ^

K1K001 for 64-bit Enabled Solaris
Base SAS 9.4_M6
Issue(s) Addressed:Introduced:
63143 Windows Defender Credential Guard and SAS® Software K1K001
65013 A grid sign-in attempt using pwd=_AUTHINFO_ fails in SAS® Viya® 3.5 K1K001
65144 A security vulnerability occurs for SAS/CONNECT® server connections when the SASCLIENTPORT is recycled K1K001
66487 Authentication to the CAS server fails with the error "Access denied..." when initiated on a SAS/CONNECT® server in a Microsoft Windows environment K1K001
67252 A SAS/CONNECT® spawner using the NETENCRYPTALGORITHM=SSL option fails with "Resource temporarily unavailable..." after exhausting pthreads K1K001
63532 You might encounter looping or an abend when you terminate a SAS® session K1K001
65040 The SAS® Workload Orchestrator web interface dashboard intermittently displays an error message "Oops! An error has occurred. Please try again later" K1K001
66213 Certificates that shipped in SAS® 9.4 contain an expired certificate from Sectigo AddTrust (expired on May 30, 2020) K1K001
NOTE: If you install this hot fix to address the issue described in SAS Note 67252 for z/OS, you must also apply E8W003 for SAS/Secure SSL 9.41_M3.
Released: March 12, 2021     Documentation: K1K001s6.html       Download: K1K001pt.zip  
Top ^




PLEASE CAREFULLY READ THE TERMS AND CONDITIONS OF THIS LICENSE AGREEMENT ("AGREEMENT") BEFORE DOWNLOADING MATERIALS FROM THIS SITE. BY DOWNLOADING ANY MATERIALS FROM THIS SITE, YOU ARE AGREEING TO THESE TERMS.
You are downloading software code ("Code") which will become part of a product ("Software") you currently have licensed from SAS Institute Inc. or one of its subsidiaries ("the Institute"). this Code is designed to either correct an error in the Software or to add functionality to the Software. The code is governed by the same agreement which governs the Software. If you do not have an existing agreement with the Institute governing the Software, you may not download the Code.
SAS and all other SAS Institute Inc. product or service names are registered trademarks or trademarks of SAS Institute Inc. in the USA and other countries. ® indicates USA registration. Other brand and product names are registered trademarks or trademarks of their respective companies.

Copyright © 2021 SAS Institute Inc. All Rights Reserved.