Installation Instructions for Hot Fix L81001

64-bit Enabled Solaris


Hot fix L81001 addresses the issue(s) in SAS High-Performance Risk Server Component 3.1 on 64-bit Enabled Solaris as documented in the Issue(s) Addressed section of the hot fix download page:

https://tshf.sas.com/techsup/download/hotfix/HF2/L81.html#L81001


The hot fix downloaded, L81001s6.zip, contains the updated files required to address the documented issues.
Do NOT extract the contents of L81001s6.zip. The hot fix installation process will extract the contents as needed.


IMPORTANT NOTES

  1. You must have SAS High-Performance Risk Server Component 3.1 installed on your system before applying this hot fix. Refer to SN-35968 for instructions on how to determine which product releases you have installed.

  2. Files delivered in this hot fix will be backed up during the installation process. However, it is good general practice to back up your system before applying updates to software.

  3. You must have Administrator Privileges on your CLIENT or SERVER machine.

  4. All currently active SAS sessions, daemons, spawners and servers must be terminated before applying this hot fix.

  5. This hot fix should be installed using the same userid who performed the initial software installation.


INSTALLATION

The L81001 hot fix for SAS High-Performance Risk Server Component 3.1 will be installed using the SAS Deployment Manager (SDM). By default, the SDM will search in the <SASHOME>/InstallMisc/HotFixes/New directory for hot fixes to be applied, but will also prompt for a location if you have downloaded hot fixes to a different directory.

After downloading L81001s6.zip, follow the instructions for applying hot fixes in the SAS Deployment Wizard and SAS Deployment Manager 9.4: User's Guide.

The content of this hot fix is listed in the hot fix manifest.


POST-INSTALLATION INSTRUCTIONS

In addition to downloading and installing the hot fix as specified above, download the Linux for x64 hot fix zip file to a temporary directory (<tempdir>) on one of the nodes of the computing appliance. Unzip the file there. Then unzip <tempdir>/products/*.zip. There should be a file <tempdir>/products/sasexe/tkrisk.so. This file should be copied under the TKGrid install location on the computing appliance; for example, /opt/TKGrid/lib.

When copying the file, make sure the proper mode of 755 is set. If your computing appliance uses a shared install, you need to copy tkrisk.so only to the shared location. However, if your computing appliance uses a replicated install, you must copy tkrisk.so to every node.



This completes the installation of hot fix L81001 on 64-bit Enabled Solaris.