Installation Instructions for Hot Fix E8D009

64-bit Enabled Solaris

Hot fix E8D009 addresses the issue(s) in SAS Web Server 9.45 on 64-bit Enabled Solaris as documented in the Issue(s) Addressed section of the hot fix download page:

https://tshf.sas.com/techsup/download/hotfix/HF2/E8D.html#E8D009

The hot fix downloaded, E8D009pt.zip, contains the updated files required to address the documented issues.
Do NOT extract the contents of E8D009pt.zip. The hot fix installation process will extract the contents as needed.

SPECIAL NOTE REGARDING SECURITY VULNERABILITY

This hot fix requires that your software must already be configured prior to installation. If no configuration directory exists at the time of installation, security updates built into this hot fix will not be completed, leaving your software in a vulnerable state.

IMPORTANT NOTES

1. This updates the version of OpenSSL to 1.0.2zg which support FIPS 140-2 compliance.

2. You must have SAS Web Server 9.45 installed on your system before applying this hot fix. Refer to SAS KB0036131 for instructions on how to determine which product releases you have installed.

3. Files delivered in this hot fix will be backed up during the installation process. However, it is good general practice to back up your system before applying updates to software.

4. You must have Administrator Privileges on your CLIENT or SERVER machine.

5. All currently active SAS sessions, daemons, spawners and servers must be terminated before applying this hot fix.

6. This hot fix should be installed using the same userid who performed the initial software installation.

7. CONFIGURATION: No automatic configuration scripting is included for this hot fix. If you have previously configured software installed, the SAS Deployment Manager may present a screen where you will see "Apply SAS Hot Fixes" and "Configure SAS Hot Fixes" options. On this screen, you must ensure that the "Configure SAS Hot Fix" option is *not* selected. If this option is automatically selected, please de-select it prior to proceeding with the SAS Deployment Manager Screens. Failure to do so could have unintended consequences when applying this hot fix.

INSTALLATION

After downloading E8D009pt.zip, follow the instructions for applying hot fixes in the SAS Deployment Wizard and SAS Deployment Manager 9.4: User's Guide.

Please review the CONFIGURATION Important Note above concerning proper selection of the "Configure SAS Hot Fix" option in the SAS Deployment Manager.

POST-INSTALLATION INSTRUCTIONS

1. For SiteMinder configuration using the updated Apache version, please review information in SASŪ 9.4 Intelligence Platform: Middle-Tier Administration Guide, Fourth Edition
   For the updated Apache version delivered in this hot fix, step 2 under "Configuring SAS Web Server for the Web Agent" should read as follows:
   
   Edit the SAS-configuration-directory\Levn\Web\WebServer\conf\httpd.conf file. Add lines that are similar to the following at the beginning of the LoadModule directives:

   LoadModule sm_module "C:/Program Files (x86)/CA/webagent/bin/mod_sm24.dll"
   SmInitFile "C:/SAS/Config/Lev1/Web/WebServer/conf/WebAgent.conf"

   For UNIX deployments, the name of the library is libmod_sm24.so instead of mod_sm24.dll.

2. If you have configured SSL/TLS manually for SAS Web Server post-deployment, to use SAS Environment Manager to monitor SAS Web Server, complete the following steps:
   1. Edit the <SASConfig>/LevX/Web/WebServer/conf/httpd.conf file and make the following changes:

      Replace the line

      Listen 80

      with the following line:

      Listen localhost:7980

      IMPORTANT NOTE:  If you use a non-default port, please enter that port number instead of the one listed above

   2. Edit the <SASConfig>/LevX/Web/WebServer/conf/extra/httpd-ssl.conf file and make the following changes:

      Locate the following lines for the certificate file and key file and enter the correct filenames: SSLCertificateFile "ssl/myhost.crt"
      SSLCertificateKeyFile "ssl/myhost.key"
      SSLCertificateChainFile "ssl/myhost.crt

3. If you manually configured SSL/TLS for SAS Web Application Server, complete the following step

   1. Edit the <SASConfig>/LevX/Web/WebServer/conf/sas.conf file and add the following two lines:

      SSLProxyCheckPeerCN off
      SSLProxyCheckPeerName off

4. If you configured SSL/TLS for SAS Web Server and SAS Environment Manager is not configured for SSL/TLS and is also on the same machine as the Web Server, then complete this step if applicable:
   1. Edit the <SASConfig>/LevX/Web/WebServer/conf/sas.conf file and comment out the following directive:

      Replace the line

      Header set Strict-Transport-Security "max-age=31536000"

      with the following line:

      #Header set Strict-Transport-Security "max-age=31536000"

5. (Optional) When FIPS mode is enabled in the SAS Mid-Tier environment the system will enforce an order of precedence by negotiating cipher suites with perfect forward secrecy (PFS) and then cipher suites without it for compatibility with legacy applications. If PFS needs to be strictly enforced then the SAS Web Application Server config file can be updated with the following changes.

   Edit each SAS Web Application Server's <SASConfig>/LevX/Web/WebAppServer/SASServerX_X/conf/server.xml file and make the following changes:

   Replace the ciphers attribute in Connector element:

   ciphers="TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_RSA_WITH_AES_256_CBC_SHA,TLS_RSA_WITH_AES_128_CBC_SHA"

   with the following line:

   ciphers="TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384"

This completes the installation of hot fix E8D009 on 64-bit Enabled Solaris.


Copyright SAS Institute Inc. All Rights Reserved.