Installation Instructions for Hot Fix E3X001
Windows for x64
Hot fix E3X001 addresses the issue(s) in CGI Tools for the Web Server 9.45 on Windows for x64 as documented
in the Issue(s) Addressed section of the hot fix download page:
Refer to SN-35968 for instructions on
how to determine which product releases you have installed.
Download and save E3X001pt.zip hot fix file. It contains the updated files required to
address the documented issues.
Do NOT extract the contents of E3X001pt.zip. The hot fix installation process extracts
the contents as needed.
You must have CGI Tools for the Web Server 9.45 installed on your system before applying this hot fix.
You must have Administrator privileges on your CLIENT or SERVER machine.
All currently active SAS sessions, daemons, spawners, and servers must be terminated before
applying this hot fix.
This hot fix should be installed using the same userid that was used to perform the initial
No automatic configuration scripting is included for this hot fix. If you have previously configured software installed,
the SAS Deployment Manager may present a screen where you will see "Apply SAS Hot Fixes" and "Configure SAS Hot Fixes" options.
On this screen, you must ensure that the "Configure SAS Hot Fix" option is *not* selected. If this option is automatically
selected, please de-select it prior to proceeding with the SAS Deployment Manager screens. Failure to do so could have unintended
consequences when applying this hot fix.
The E3X001 hot fix for CGI Tools for the Web Server 9.45 will be installed using the SAS Deployment Manager.
By default, the SAS Deployment Manager searches the <SASHOME>/InstallMisc/HotFixes/New directory for hot
fixes to be applied, but also prompts for a location if you have downloaded hot fixes to a different
Download the E3X001pt.zip to the <SASHOME>/InstallMisc/HotFixes/New directory. Then follow the
instructions for applying hot fixes in the "Finding and Applying Hot Fixes" section of the
SAS Deployment Wizard and SAS Deployment Manager 9.4: User's Guide.
Please review the note above concerning proper selection of the "Configure SAS Hot Fix"
option in the SAS Deployment Manager.
The content of this hot fix is listed in the hot fix manifest.
- To preserve customizations to the files on your web server machine, back up the following files
in the directory corresponding to the <web_server_root>/sasweb/IntrNet9/htmSQL location before proceeding:
- To complete the installation of this hot fix, you must manually copy files listed in the previous
step from the installation directory, <SASHOME>/CGIToolsForTheWebServer/9.4/websrv/sasweb/IntrNet9/htmSQL,
to the directory on your web server machine corresponding to the
- If customizations were made in the original files on your web server machine, then the
customizations need to be made in the updated files.
- Once the hot fix is installed and the files are copied to the web server machine, the setup
instructions included with the samples (installed as part of the initial deployment) can be followed.
As a reminder, these are sample files that are being installed and should not affect the functionality of
This completes the installation of hot fix E3X001 on Windows for x64.
Copyright 2019 SAS Institute Inc. All Rights Reserved.